215184
292
Revision A
8.17
Lubricating Header
Table 8.4 Recommended Lubricant
Specification
Description
Use
SAE multipurpose
High temperature, extreme pressure (EP2) performance with
1% max molybdenum disulphide (NLGI Grade 2) lithium base
As required unless
otherwise specified
SAE multipurpose
High temperature, extreme pressure (EP) performance with
10% max molybdenum disulphide (NLGI Grade 2) lithium base
Driveline slip-joints
8.17.1
Greasing Procedure
Greasing points are identified on the machine by decals showing a grease gun and grease interval in hours of operation.
Grease point layout decals are located on the header and on the right side of the float module.
WARNING
To avoid injury or death from unexpected start-up of machine, always stop the engine and remove the key from the
ignition before leaving the operator
’
s seat for any reason.
1.
Shut down the engine, and remove the key from the ignition.