215184
201
Revision A
1017298
A
B
Figure 6.63: Auger Finger Hole
3.
Remove bolts (A) and tee nuts securing plastic guide (B) to
the auger, and remove the guide from inside the auger.
1017305
B
A
Figure 6.64: Plug
4.
Coat bolts (B) with medium-strength threadlocker
(Loctite
®
243 or equivalent), and then position plug (A) into
the hole from inside the auger. Secure with two M6 hex
head bolts (B) and tee nuts. Torque to 9 Nm (80 lbf
∙
in).
1019338
B
A
Figure 6.65: Auger Access Hole Cover
5.
Coat bolts (A) with medium-strength threadlocker
(Loctite
®
243 or equivalent) and reinstall access cover (B).
Secure the access cover in place with bolts (A). Torque bolts
to 9 Nm (80 lbf
∙
in).