214805
75
Revision A
Chapter 4:
Lubricating the Machine
4.1
Greasing Procedure
DANGER
To avoid bodily injury or death from unexpected start-up or fall of raised machine, stop engine, remove key, and engage
safety props before going under machine.
1022254
Figure 4.1: Grease Interval Decal
1.
Wipe grease fitting with a clean cloth before greasing to
avoid injecting dirt and grit.
2.
Inject grease through fitting with grease gun until grease
overflows fitting, except where noted.
3.
Leave excess grease on fitting to keep out dirt.
4.
Replace any loose or broken fittings immediately.
5.
If fitting will not take grease, remove and clean thoroughly.
Also clean lubricant passageway. Replace fitting if
necessary.
Содержание A40-D
