23
MSID18-Li
In
more
detail
. . .
General operation
General operation
> Check the product, its battery pack and charger as well as accessories for damage
before each use. Do not use the product if it is damaged or shows wear.
> Double check that the accessories and attachments are properly fixed.
> Always hold the product on its handle. Keep the handle dry to ensure safe support.
> Ensure that the air vents are always unobstructed and clear. Clean them if necessary
with a soft brush. Blocked air vents may lead to overheating and damage the product.
> Switch the product off immediately if you are disturbed while working by other people
entering the working area. Always let the product come to complete stop before
putting it down.
> Do not overwork yourself. Take regular breaks to ensure you can concentrate on
the work and have full control over the product.
> Where possible, secure smaller work pieces to prevent them from moving during
operation.
WARNING!
Keep in mind that there are buried objects hidden in every
household! Ensure that there are no gas, water or power lines hidden in the
working area that may be hit before operation – danger of electrical shock
and serious damage to people and property! Use a suitable detector to trace
such objects in advance!
Screw driving
> Pre-drill the holes with a smaller diameter of the screw to be screwed.
> Hold the product perpendicular to the screw to be screwed in/out. Holding it at an
angle may cause slipping or jamming of the driver bit.
> Place the tip of the driver bit directly on the screw first and then switch the product on.
> Only apply as much pressure as necessary to keep the screw in place and the driver
bit in contact with the screw head. Too much pressure will cause damage to the
screw head and driver bit, too little pressure will cause the driver bit to slide away.
> Remove blocked and stuck screws by changing the rotational direction.
> When the fastener is tightened or loosened, release the on/off switch. After fastening
check the torque with torque wrench.