16
MSID18-Li
Getting
Started . . .
Setup
WARNING!
The product must be fully assembled before operation! Do not
use a product that is only partly assembled or assembled with damaged parts!
Follow the assembly instructions step-by-step and use the pictures provided
as a visual guide to easily assemble the product!
Do not connect the product to power supply before it is completely assembled!
Driver bits
Different driver bits can be used with this product depending on the screw/bolt head.
WARNING!
Always use driver bits according to the intended use! For example,
never use a slotted driver bit for crosshead screws! Observe the technical
requirements of this product (see section Technical specifications) when
purchasing and using driver bits!
Driver bits become hot during use! Handle them carefully! Wear protective
gloves when handling driver bits in order to avoid injuries like burns!
Inserting / removing / replacing
> Pull the sleeve (3) and insert a
suitable driver bit all the way to
the stop into the tool holder (2).
Release the sleeve (3) to lock the
bit in place (Fig. 1).
> Remove the driver bit and insert
a new one as described above
if desired.
Fig. 1
2 3
Before you start
