MacAllister MCS2400 Скачать руководство пользователя страница 43

Страница: 43 / 46

MCS2400

by MacAllister

detail...

Injuries and damage to property due to broken application tools

or the sudden impact of hidden objects during use.

Danger of injury and property damage caused by flying objects.

Injuries and damage to property to due to thrown and fallen

objects.

Prolonged use of this product expose the operator to vibrations

and may produce ‘whitefinger’ disease. In order to reduce the

risk, please wear gloves and keep your hands warm. If any of the

‘whitefinger’ symptoms appear, seek medical advice immediately.

‘Whitefinger’ symptoms include: numbness, loss of feeling,

tingling, pricking, pain, loss of strength, changes in skin colour

or condition. These symptoms normally appear in the fingers,

hands or wrists. The risk increases at low temperatures.

Technical and legal information

WARNING!

This product produces an electromagnetic

field during operation! This field may under some

circumstances interfere with active or passive medical

implants! To reduce the risk of serious or fatal injury, we

recommend persons with medical implants to consult

their doctor and the medical implant manufacturer before

operating this product!

MNL_MCS2400_DFT_GB_V05_111108.indd 43

11/8/11 5:17:42 PM

Содержание MCS2400















































Результаты поиска

Содержание MCS2400

Отзывы:

MacAllister MCS2400, Руководство пользователя, Страница: 43 / 46

Результаты поиска

Содержание MCS2400

Отзывы: