MacAllister MCS2400 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 46

MacAllister MCS2400 Скачать руководство пользователя страница 16

16

MCS2400

by MacAllister

In

more

detail...

GB

IE

Product functions

WARNING!

If the saw chain and motor fail to stop when

the chain brake is engaged, take the product to the

nearest authorised dealer or service centre! Do not use

the product if the chain brake is not working properly!

The chain brake should not be used for starting and

stopping the product during normal operation!

On/off switch

Make sure the safety chain brake (2) is disengaged

>

(see above Fig. 13).

Grip the product with both

>

hands, your left hand holding

the front handle (1) (do not

hold the chain brake) and

your right hand holding the

rear handle (12).

Press the lock-off button (16)

>

and hold it in position.

Squeeze in the on/off switch

>

(17) to switch the product on

(Fig. 18).

1.

2.

Fig. 18

Release the on/off switch (17) to switch the product off.

>

NOTE:

The motor will not start if the chain brake is in the

engaged position.

Press the lock-off button (16) with your right thumb, then fully

>

squeeze in the on/off switch (17) with your index finger and hold

it in position.

While the motor is running, activate the chain brake (2) by

>

moving your left hand forward against the chain brake (2). The

saw chain (3) and motor should stop immediately.

Chain brake

MNL_MCS2400_DFT_GB_V05_111108.indd 16

11/8/11 5:17:33 PM

«
...
14
15
16
17
18
...
»

Содержание MCS2400















































Отзывы:

Нет отзывов