4
Approved ear protection should be worn when using flip
over saws.
Never try to cut pieces that are larger than the maximum
specified for the machine, it can cause damage to the
blade guard and could cause injury to the operator.
The equipment is intended for use only in premises having
a service current capacity equal to, or greater than 100A
per phase.
Ensure that the machine is fixed to a bench, whenever
possible.
Rebating or grooving should not be carried out unless
suitable guarding, such as a tunnel guard, is fitted as a top
guard.
The saw should not be used for slotting (stopped groove).
During transportation the upper part of the saw blade shall
be covered, for example by the top guard or the saw blade
should be adjusted to the lowest position.
Symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear respiratory protection.
Conforms to relevant
safety standards.
Keep hands clear of rotating blade.
Blade may continue to run for a
period when switched off.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Read the instruction manual.
Do not clear blade obstructions with hands.
Do not push work pieces through blade with
your hand. ONLY USE supplied push stick.