MACTOOLS.COM
6
CUTTING TOOL WARNINGS
Fig. 1
WARNING
• Slipping, tripping and/or falling while operating air tools
can be a major cause of serious injury or death. Be aware
of excess hose left on walking or work surface. Be aware of
slippery surfaces
• Do not disable the lock-off lever. If the lock-off lever is
disabled, the tool may start unexpectedly when it is laid
down.
• Cutting with these tools will create sharp edges. To avoid
injury wear gloves to protect hands.
• Cutting edges and shear blades can become hot during
use. Do not touch.
• Never force the cutting tool to cut faster or through heavier
gauge material than rated capacity. Use the correct power
tool for your application.
• Tool shaft may continue to reciprocate briefly after throttle
is released. Avoid direct contact with accessories during
and after use. Gloves can reduce the risk of cuts and
burns.
• Keep hands away from moving parts. Never place your
hands near the cutting area.
• Blade breakage may occur if the blade does not extend past the workpiece during the cut (Fig. 1).
• Do not remove blade guard from the saw, removal of the guard increases risk of injury.
PROPER HAND POSITION
WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown
(Fig. 2).
WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires holding the air saw, with both hands.
Fig. 2
