Mac allister MHTP245-2 страница 35 Скачать руководство пользователя

Страница: 35 / 40

MHTP245-2

by MacAllister

Technical and legal information

detail...

Always ensure the safety guard supplied is fitted before using

the product. Never attempt to use an incomplete product or one

fitted with an unauthorised modification.

Check cutting blade regularly for damage, and if damaged repair

immediately.

Do not overload the product.

Check immediately if the product starts to vibrate abnormally.

Excessive vibration can cause injury.

Stop the engine and switch the product off when the cutting

blade is blocked. Unplug the spark plug connector and remove

the blockage. Inspect the cutting blade for damage before using

the product again.

Follow the maintenance and repair instructions for this product.

Never carry out any modifications of the product. Never change

the preset rotary speed or the engine and product settings.

Information about maintenance and repair is provided in this

instruction manual.

Fuel handling

Always disconnect the spark plug connector and let the product

cool down, before refuelling it. Petrol is easily flammable. Never

smoke when you are refuelling the product. Do not refuel the

product, if there is an open fire in the vicinity!

Always use suitable aids such as funnels and filler necks. Do

not spill any fuel on the product or its exhaust system. There

is a risk of ignition. Remove spilled fuel carefully from all parts

of the product. Any residue which may be present must have

completely volatilised, before the product is put into operation!

Never use the product in environments where there is a risk

of explosion. Exhaust gases and fuel fumes are noxious. Fuel

fumes can ignite.

Never breathe in any fuel fumes, when you are refuelling the

product. Never fill the tank in enclosed spaces, such as basements

or sheds. There is a risk of poisoning and explosion!

Avoid skin contact with petrol.

Do not eat or drink, while you are refuelling the product. If you

have swallowed petrol or oil, or if petrol or oil has got into your

eyes, then seek the advice of a doctor immediately.

Close the tank lid immediately after filling the tank. Make sure

that it is properly closed.

Never use the product without an air filter.

MNL_MHTP245-2_DFT_GB_V3_111118.indd 35

11/18/11 5:57:25 PM

Содержание MHTP245-2









































Результаты поиска

Содержание MHTP245-2

Отзывы:

Похожие инструкции для MHTP245-2

Бренды по названию

Популярные бренды

Mac allister MHTP245-2, Руководство пользователя

Результаты поиска

Содержание MHTP245-2

Отзывы:

Похожие инструкции для MHTP245-2

Бренды по названию

Популярные бренды