E
n
g
li
sh
F
ra
n
ça
is
35
MAAX SPAS PERFORMANCE SERIES
Problem
Water leakage
from under spa
No air flow
from jets
Motor will
not operate
Black powder
film around
water line
The spa will
not shut off
Usual Cause
- Check unions & drain hoses
- Air control not open - Jet nozzle not
seated properly - Jet nozzle missing
- House circuit breaker tripped or in
OFF position - Improper or defective
wiring or electrical supply - Thermal
Overload Protection switch tripped
- Wearing in of turbo/blower brushes
- Spa trying to heat - Spa is in filter
cycle - Spa is in standard Mode
Solution
- Close or tighten as necessary
- Open control - Check jet nozzles
- Inspect jets and replace as
needed
- Reset circuit breaker - Contact
dealer - Auto reset after motor
has cooled. Contact dealer if
motor continues to cycle
- Will disappear after use
- Check ‘Set Temperature’ in
Standard Mode - Normal. No
need to change - Check mode
setting