11
Original
Version 1-2011
2.4
Preparing the machine for operation
Install the components supplied with the machine as follows:
Figure 6.
Figure 7.
Figure 8.
Note! Each lug has pins for drawbars with small and
large eyelets.
Install the pins that will connect the splitter to the
tractor in the outermost position.
Attach the lugs (2 pcs), which have
pins for the tractor drawbars (no. 1
in Figure 1), to the frame of the
machine with three bolts. Tighten
the bolts with a spanner.
Attach the blade chain's sawdust
guide (no. 3 in Figure 1) to the
machine frame with two bolts.
Use four bolts to fasten the cardan
shaft guard (no. 6 in Figure 2) to the
frame on the front side of the angle
transmission. Tighten the bolts with
a spanner.
Note! Does not apply to
Combi models.
