© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
3.5. Set the IP Address on the PC
The default IP address of the switch is a 192.168.100.xxx. It is displayed at the front end display.
The default subnet mask of the switch is 255.255.255.0.
This means your PC must be temporarily set to a compatible IP address.
1. Unplug the computer from the Local Area Network (LAN).
2. Go to the
Control Panel
on the computer.
3. Go to
Network and Sharing Center
and click on
Change adapter settings
.
4. Right-click the connection for your LAN, and then click
Properties
.
If you´re prompted for an administrator password or confirmation, type the password or provide confirmation.
5. Click the
Networking
tab. Under
This connection uses the following items
, click
Internet Protocol Version
4 (TCP/IPv4)
, and then click
Properties
.
6. Select
Use the following IP address
and enter a compatible IP address e.g.
192.168.100.10
and the default
subnet mask
255.255.255.0
.
The PC is set to a compatible IP address.
3.6. Access the Web Interface
Follow these steps to access the web interface of the MA Network Switch.
Requirements:
18
Содержание Network Switch
Страница 1: ...Version 3 3 2017 04 24 English...
