M86 Security MSA, Руководство по установке, Страница: 82 / 118

B
EST
R
EPORTING
P
RACTICES
R
EPORTING
S
CENARIOS
76
M86 S
ECURITY
I
NSTALLATION
G
UIDE
3. Click Apply to accept your selection and to close the window. The regenerated
report now displays yesterday’s data in the Summary Drill Down Report view.
In the ER Web Client User Guide index, see:
• How to: create a New Report from the current report view
Step D: Create a double-break report with two sets of criteria
1. To continue this exercise, select the record for the category you wish to further
investigate.
NOTE : If necessary, scroll down to view the entire list of categories in the report view.
2. Now, to find out who is visiting sites in this category, you will need to identify the
user(s).
Since there are two sets of criteria you need for this exercise, you must drill
down into the selected category and also specify that you wish to view user IP
addresses. By specifying two sets of criteria, you create a double-break report
view.
Note the columns of filter buttons to the right of the Categories column. Click the
Category/IPs button corresponding to the targeted category:
After executing the last command, note that user IP addresses now display in
the first column of the report view instead of categories.
In the ER Web Client User Guide index, see:
• How to: use filter columns and buttons
For the last step of this exercise, you will select a user from the current Summary
Drill Down Report view and then drill down further to see which URLs that user
visited, thereby creating a Detail Drill Down Report view.