M2M LOGIC io Скачать руководство пользователя страница 2

Страница: 2 / 39

RTCU LX4 pro Technical Manual V1.00

Advanced Industrial M2M/IoT Gateway

Logic IO ApS.

Ph: (+45) 7625 0210

Holmboes Allé 14

Fax: (+45) 7625 0211

8700 Horsens

Page 2 of 39

Email: [email protected]

Denmark

www.logicio.com

Introduction

The

RTCU LX4 pro

is a powerful successor to the

RTCU DX4i pro

with significant improvements in

features, capacity, power, and security. In addition, the

RTCU LX4 pro

is based on the latest

hardware architecture

, offering an unprecedented balance between price and performance.

The

RTCU LX4 pro

is positioned for a broad range of professional industrial Internet of Things

applications. With onboard

M-Bus / Wireless M-Bus

and pulse counting inputs (

), it is a perfect

component in advanced

Energy Management

applications.

The device rests on the

NX32L

(NX32 for Linux) architecture that embraces many new technologies

and at the same time maintains full backward compatibility, which ensures already implemented and
tested

NX32

applications can execute without changes.

The

RTCU LX4 pro

device has been designed to meet the ever-increasing security challenges. It offers

full TLS on all major protocols and includes a hardened protected execution environment with dual-
boot and automatic fallback and recovery.

The

RTCU LX4 pro

can also operate as a secure and intelligent industrial router/firewall for LAN side

clients connecting to the Internet over the cellular interface.

This manual contains technical documentation covering the installation and usage of the

RTCU LX4

pro

device. For detailed information on the product's programming and software configuration,

please refer to the RTCU IDE documentation.

For detailed information on the powerful RTCU M2M Platform, please refer to the

RTCU M2M Platform datasheet

Содержание LOGIC io








































Результаты поиска

Содержание LOGIC io

Отзывы:

Бренды по названию

Популярные бренды

M2M LOGIC io, Техническое руководство

Результаты поиска

Содержание LOGIC io

Отзывы:

Бренды по названию

Популярные бренды