2
SATELLITE DISH MOUNT ASSEMBLY
DISH MOUNT BASE
PLATE
STEP 1:
Mount one
SATELLITE DISH SUP-
PORT
to
DISH MOUNT BASE PLATE (See
FIG. 1)
.
This support will need to align with the
holes in the
SATELLITE DISH
, therefore leave
the hardware loose to allow for some adjust-
ment during assembly.
FIG. 1
BOLT, 1/4
-
20 X
1”,
FLAT ALLEN HEAD
LOCKNUT, 1/4
-
20
QTY (32)
SATELLITE DISH SUPPORT
FIG. 2
STEP 2A:
Install the
DISH SUPPORTS
for the
FGSD
-
2.4DH
. Leave all the hardware finger
tight
(See FIG. 2)
.
See STEP 2B for assembly FGSD
-
2.4DH
-
YS
SATELLITE DISH
SUPPORT
QTY (8)
BEFORE YOU BEGIN: Look over all the DRAWINGS to get familiar with the various parts
and assemblies in the system. Tools handy for assembly process:
11/32”, 7/16”, 1/2”, 9/16”
and
5/8”
spin
-
tites, end wrenches and/or sockets.
NOTE:
All installations are unique in some way, which means it's OK to preassemble certain hardware, or re-
arrange the assembly process to meet specific site requirements. A quick review of the assembly
notes and drawings should help firm up the appropriate strategy. Please remember to double
-
check all
hardware for tightness BEFORE it becomes inaccessible.
FGSD
-
2.4DH
