R6-NP1
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-7792 Rev.2 P. 2 / 4
INSTALLATION
Use the Base Model R6x-BSA or R6x-BSB.
Before mounting the Network Interface Module onto the Base, be sure to configure the module as explained below.
■
Station No.
See “COMPONENT IDENTIFICATION.”
Station No. is selectable from 00 to 7D via the front rotary
switches. It is programmed to 7D if a larger number is set
on the switches.
■
NETWORK SLOTS ON THE BASE
Mount the Network Module to the dedicated slot on the
base.
• R6x-BSA
The I/O and the power (model: R6x-PF1) modules can be
positioned freely on whichever among the slots 1 through 8.
Set a module address to each I/O module.
1 2 3 ・・・ 8
Network
Module
I/O & Power Supply
Modules
• R6x-BSB
The power module (model: R6-PSM) should be located on
the extreme left, the I/O modules can be positioned freely
on whichever among the slots 1 through 8. Set a module
address to each I/O module.
1
Power Supply
Module
I/O Modules
2 3 ・・・ 8
Network
Module