R1M-P4
P. / 5
EM-5665 Rev.9
COMPONENT IDENTIFICATION
RS-485
Connector
Address Setting
Rotary SW
Configurator
Jack
Specifications Marking
Power Terminals
RS-232C
9-pin Connector
RUN Indicator
LED
1 2
T1 T2 T3 T4
T5 T6 T7
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
1 2 3 4 5 6 7 8
SW602
SW602 is fixed to
the position 3.
DO NOT CHANGE.
Momentary
SW604
Totalized
(factory default)
Totalized (lower 6 digits) or Momentary Value Display
Totalized or Momentary
Display Selector
Contact Input LED
Channel Selector
for Digital Meter
Contact Output LED
■
TOP VIEW
■
BOTTOM VIEW
■
REAR VIEW
INSTALLATION
■
DIN RAIL MOUNTING
Set the body so that its DIN rail
adaptor is at the bottom. Pull
down the DIN rail adaptor.
Position the upper hook at the
rear side on the DIN rail and
push in the lower. Push back the
DIN rail adaptor.
■
WALL MOUNTING
Set the body so that its DIN rail
adaptor is at the bottom. Pull
down the DIN rail adaptor.
Refer to “EXTERNAL DIMEN-
SIONS.”
DIN Rail Adaptor
DIN Rail
35mm wide
CHECKING
1) Terminal wiring: Check that all cables are correctly con-
nected according to the connection diagram.
2) Power input: Check supply voltage.
ADJUSTMENT PROCEDURE
This unit is calibrated at the factory to meet the ordered
specifications, therefore you usually do not need any cali-
bration.
