R1D-GH2
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-5958 Rev.7 P. 4 / 5
INPUT RANGE SELECTING
Select switches to match the input signal according to the table below.
SW311 SW305 SW304 SW303 SW302
SW405 SW404 SW403 SW402
SW301
O
N
2
1
3
4
5
6
7
8
SW411
SW401 SW308 SW307 SW306
SW408 SW407 SW406
O
N
2
1
3
4
5
6
7
8
INPUT
SWITCHES
SETTING
NOTES
Thermocouple
SW301 – SW308 (ch 1 – ch 8)
SW401 – SW408 (ch 9 – ch 16)
Set to position “1”
Attenuation OFF
SW311 (ch 1 – ch 8)
SW411 (ch 9 – ch 16)
OFF
Voltage input, 0.8V or less
SW301 – SW308 (ch 1 – ch 8)
SW401 – SW408 (ch 9 – ch 16)
Set to position “1”
Attenuation OFF
SW311 (ch 1 – ch 8)
SW411 (ch 9 – ch 16)
ON
Voltage input, above 0.8V (*)
SW301 – SW308 (ch 1 – ch 8)
SW401 – SW408 (ch 9 – ch 16)
Set to position “3”
Attenuation ON
SW311 (ch 1 – ch 8)
SW411 (ch 9 – ch 16)
ON
(*) Factory setting unless specific input types and ranges are specified when ordering
TRANSMISSION DATA
■
INPUT
: Thermocouple or DC input*, 16 points
Input resistance
: 300 kΩ
Thermocouple types
: PR, K, E, J, T, B, R, S, C, N, U, L, P
MEASURING RANGE
NOTES
±20V, ±5V, ±1V
±0.8V, ±0.2V, ±50mV, ±10mV
Atten. SW ON (3)
Atten. SW OFF (1)
Sampling rate
: 150 millisec./16 points
* Common negative for DC input
■
ANALOG INPUT
A/D conversion output
: 16-bit signed binary (negative
range represented by 2’s complements)
Engineering unit value is converted into A/D conversion
data as shown in the table below.
INPUT TYPE & RANGE
A/D DATA (decimal)
±20V
±20000
±5V
±5000
±1V
±10000
±0.8V
±8000
±0.2V
±20000
±50mV
±5000
±10mV
±10000
Thermocouples
Temperature × 10
In order to change input type and range after shipment, the
R1X configurator software (model: R1CON) is required.
