M-system R1C-GH, Инструкция по эксплуатации

Страница: 4 / 13

4. HARDWARE SPECIFICATIONS
ITEM SPECIFICATIONS
Analog input ±20V DC, ±5V DC, ±0.8V DC, ±0.2V DC, ±50mV DC, ±10mV DC (input resistance 300 kΩ)
Sampling rate Approx. 150 msec. / 16 points
Protocol CC-Link, Ver.1.10 / Ver. 2.00
Digital output 16-bit signed binary (14 bits for data)
Input Type
A/D Conversion Range (decimal)
±20V ±20000
±5V ±5000
±1V ±10000
±0.8V ±8000
±0.2V ±20000
±50mV ±5000
±10mV ±10000
Thermocouple Temperature × 10
Accuracy DC Input ±0.3%
T/C Type Usable Range
(°C)
Accuracy
(%)
Conformance Range
(°C)
Thermocouple (PR) 0 to 1770 ±0.5 400 to 1770
K (CA) -270 to +1370 ±0.3 0 to 1370
E (CRC) -270 to +1000 ±0.7 0 to 1000
J (IC) -210 to +1200 ±0.7 0 to 1200
T (CC) -270 to +400 ±1.0 0 to 400
B (RH) 100 to 1820 ±0.7 700 to 1820
R -50 to +1760 ±0.7 400 to 1760
S -50 to +1760 ±0.7 400 to 1760
C (WRe 5-26) 0 to 2320 ±0.7 0 to 2320
N -270 to +1300 ±0.5 0 to 1300
U -200 to +600 ±0.5 0 to 600
L -200 to +900 ±0.3 0 to 900
P (Platinel II) 0 to 1395 ±0.5 0 to 1395
CJC error ≤ ±3°C at 20°C ±10°C
Number of inputs 16
Isolation Input to CC-Link (FG) to power
Required nodes CC-Link Ver. 1.10 4 (RX/RY 32 points each, RWr/RWw each 16 points)
CC-Link Ver. 2.00 1 (RX/RY 64 points each, RWr/RWw each 16 points)
Power input, CC-Link Euro type connector terminal (applicable wire size: 0.2 to 2.5 mm
2
(AWG 24 to 12), stripped length 7 mm)
Input M3 screw terminals (torque: 0.6 N∙m)
Configurator 2.5 dia. miniature jack; RS-232-C level
Noise immunity 1000 Vp-p, 1 µsec.
Dielectric strength 2000V AC @ 1 minute (input to CC-Link [FG] to power to ground [FG1])
Insulation resistance ≥100 MΩ with 500V DC (input to CC-Link [FG] to power)
Weight 400 g (0.88 lb)
Power input R1C-GH2T-M2 85 – 264V AC, 47 – 66 Hz
R1C-GH2T-R 24V DC ±10%
Power consumption R1C-GH2T-M2 Approx. 10VA
R1C-GH2T-R Approx. 7W
R1C-GH
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-5956 Rev.11 P. 4 / 13