![background image](http://html1.mh-extra.com/html/m-system/m7easdy/m7easdy_instruction-manual_3152671007.webp)
M7EASDY
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-7763 Rev.5 P. 7 / 9
■
FLOWCHART
Monitor Mode
Contents
Set Up Transmitter
Input
User Unit Setting
Calibration
Fine Adjustment
Scaling
Unit
Linearizer
Linear
(no linearization)
Alarm Value
Trip Operation
Coil at Alarm
Alarm
Set Values
(L1, L2, L3, L4)
Decimal Point
Select
0 : 9999 1 : 999.9
2 : 99.99 3 : 9.999
Set 0%, Set 100%
Set in %
0.00 to 99.99%
Set 0%, Set 100%
0 – 20mA
Zero : -99.99 to +99.99%
Span : 0.000 to 9.999
Set 0%, Set 100%
Selectable
from -9999 to 9999
Enter input value in
scaled range.
Unit : Scale unit
Select
(L1, L2, L3, L4)
Hi or Lo alarm trip
Energize or De-energize
Select
(L1, L2, L3, L4)
Set 0%, Set 100%
Selectable
from -9999 to 9999
Linearization Table
X : Input %
Y : Linearized value
Max. 128 points
Select
(A, mA, V, mV, W,
mW, %, °C, °F, W, Pa,
kPa, MPa, User Unit)
Parameter Protection
Setting
Lock : Protect
Unlock : Not protect
Low Cut
User Table
(linearization)
Square Root (sqt)
A
B