M-system DL8 Series Скачать руководство пользователя страница 114

Страница: 114 / 183

114

DL8 USERS

MANUAL EM-7691-B Rev.24

10.4 TEST TRANSMISSION

FTP test transmission is available using the DLCFG. Follow the procedure as explained below.

1.Click

Maintenance

2.Click

3.Click

Main Window

The DL8 sends data stored in the memory and at the moment of the transmission.

Time

Storing Interval

Storing Data

Test Transmission

Test: Sending stored data plus

data sampled at the moment of test

Next regular transfer: Sending data stored

after the test till the moment of transfer

NOTE

• If test transmissions are repeated multiple times, data sent in the following regular transmission is the one from the

last test to the scheduled transmission time.

• If the FTP client test file name is the same as that of the regular transmission, the older one is overwritten.

10.5 STATUS VERIFICATION

You can check transmission status via terminal software in the same way as in the cloud access mode of the web server.
Refer to 8.8.3 STATUS VERIFICATION.

NOTE

• To verify transmission status while conducting a test transmission, connect the DLCFG via network.

Refer to 14.3 DLCFG VIA NETWORK.

Содержание DL8 Series
























































































































































































Результаты поиска

Содержание DL8 Series

Отзывы:

M-system DL8 Series, Руководство пользователя, Страница: 114 / 183

Результаты поиска

Содержание DL8 Series

Отзывы: