41
73ET/74ET/75ET USERS MANUAL EM-7353-0003B Rev.5
4.1.4
CONTROL BUTTONS
Pen Select
Pen Select is used to assign signal channels to be plotted on the screen.
Touch Pen Select and [+] and [–] selectors appear at the right side of each digital display (Figure 4.1.4a).
Figure 4.1.4a: Pen selector.
Touching any part of the tag name area opens the Pen Select view (Figure 4.1.4b).
Figure 4.1.4b: Pen select.
Touch the pen numbers you want to assign to the screen. Assigned pen numbers are shown in white characters,
while non-assigned pens are in black. Touching Cancel returns the view to the previous view.
Assigned pens are indicated on the digital display area with their tag names. When all pens are assigned, touch OK
to apply the change and go back to the record view. Touching Cancel returns the view without applying changes.
The [+] and [–] buttons on the right side of tag names is also used to change the pen numbers. Touching [+] button
increases the channel number, and [–] button decreases it. Touch OK when a desired channel is displayed. If no
channel is assigned to a digital display, it indicates ‘No select’ instead of a tag name (Figure 4.1.4c) and no plotting
is executed.
Figure 4.1.4c: Non-selected channel.
Overview
Touch Overview button to switch the view to Overview. Refer to Section 4.2 for detailed information.
Bargraph
Touch Bargraph button to switch the view to Bargraph view. Refer to Section 4.3 for detailed information.
Triple
Touch Triple button to switch the view to Triple view. Refer to Section 4.4 for detailed information.
Setting
Touching Setting buttons calls up the Setting view. Options in white characters can be modified while recording.
Содержание 75ET
Страница 24: ...20 7xETBLD USERS MANUAL EM 7353 0003C...