20
73ET/74ET/75ET USERS MANUAL EM-7353-0003B Rev.5
3.
SETTING THE 7xET
Touching Setting button on the initial view opens Setting view which consists of two pages. Figure 3a shows the first
page.
Touching Page button turns the page of the Setting view to show the second page (Figure 3b).
Touch Record and return to the Record view in order to apply the new setting.
Figure 3a: Setting view, Page 1.
Figure 3b: Setting view, Page 2.
In order to enable new setting, press Record button and go back to Record View (Trend, Overview or Bargraph).
3.1
COMMUNICATION SETTING
Touching the current selection of the Communication Setting shows selectable options at the bottom of the screen
(Figure 3.1).
DEMO:
You can run the 7xET program without actual signal input for learning, evaluation and demonstration
when you choose DEMO.
RxM:
Choose this option when you connect R1M/R2M via Modbus RTU.
Cancel button is used for returning to the Setting view without any change in the Communication Setting.
Figure 3.1: Communication setting.
3.2
STORING RATE
Touching the current selection of the Storing Rate shows selectable options at the bottom of the screen (Figure 3.2).
Choose among 0.5 sec., 1 sec., 2 sec., 5 sec., 10 sec., 1 min., and 10 min.
Total recording time depends upon the storing rate selection. Selecting greater storing rate allows longer recording
time, though the data are more thinned, which may jeopardize the data accuracy.
Number of nodes, alarm output setting and other factors may affect the smallest possible rate.
CAUTION !
When the storing rate setting is changed, previously stored data are overwritten with new data.
Figure 3.2: Storing rate.
Содержание 75ET
Страница 24: ...20 7xETBLD USERS MANUAL EM 7353 0003C...