13
7xETBLD USERS MANUAL EM-7353-0003C
2.5
FILE OPERATION BUTTONS
2.5.1 FILE READ
When you need a specific set of parameter settings, press [File read] and choose one of the parameter files saved
as in 2.5.2.
2.5.2 FILE WRITE
Parameters set on the 7xETBLD can be saved in a file with user-specified file name (up to 8 characters).
Parameter contents uploaded from the 7xET also can be saved in the same manner.
When you use a file created on the 7xETBLD for the 7xET, the file name must be 7xET.7xPA. Add .7xPA at the end
of the file name.
2.5.3 SETTING TO CSV
Parameters set on the 7xETBLD can be saved in the CSV format.
Parameter contents uploaded from the 7xET also can be saved in the same manner.
Pressing [Setting to CSV] opens up the window shown in Figure 10 on the screen.
Figure 10. Setting to CSV.
System configuration:
Communication setting, Storing rate, Data storing method, Start mode,
Temperature unit, Data storing form, Digital display type, Display rate,
Chart speed, Digital display (auto hide), Graph (chart direction),
Data file used volume, Screen saver,
Node setting, Pen setting (common, analog, discrete, alarm)
Node setting:
Node number and device
Pen configuration:
Common pen setting, Analog pen setting, Analog alarm setting, Discrete pen and
alarm setting
Pen select
Pen number and tag name
2.5.4 CF DATA CREATE
The 7xET automatically creates a data area dedicated to store data files when it starts up. It can also be created on
the PC using the 7xETBLD.
Press [CF Data create] and the window shown in Figure 11 appears on the screen.
Enter the drive ID where you have a CF Card and press [Create]. Then the window is replaced with the one shown
in Figure 12.
Pressing [Cancel] stops creating the file.
The field below the [Cancel] button shows two figures: file size to be created on the right, file size being created on
the left.
When the operation is complete, [Congratulations!] appears on the screen.
Содержание 75ET
Страница 24: ...20 7xETBLD USERS MANUAL EM 7353 0003C...