M-system 54UL, Руководство по эксплуатации

Страница: 8 / 32

54UL
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-6488-B Rev.3 P. 8 / 32
L
ON
W
ORKS
COMMUNICATION
■
DEVICE INTERFACE FILE (external interface)
A dedicated Device File ‘54UL_xxx.XIF (xxx = Version)’ is required to set up the 54UL using an integration tool such as Lon
Maker.
On-line download is available for Device Image files at http://www.m-system.co.jp.
■
TRANSMISSION SPECIFICATIONS
Transmission Mode LonTalk
Interface TP/FT-10
Neuron chip: FT3150
Transceiver: FT-X1 (equivalent to FTT-10A)
Transfer Rate 78 kbps
Program ID 9 000DF 1535 0A 04 00
SPID Model Number
Media Channel – TP/FT-10
Usage Class – General
Device Class – Multi-Phase Power Monitor
Manufacturer ID – M-System Co., Ltd.
Standard Format
Address Table 15
Alias Table 13
Domain Table 2
■
FUNCTIONAL BLOCKS
The following five Functional Blocks are available. One Object for each block is available.
OBJECT ID FUNCTIONAL BLOCK
0 NodeObject
1 InstObject
2 EnergyObject
3 DemandObject
4 StatisticsObject
■
SUPPORTED NETWORK VARIABLE TYPES
Supported Network Variable Types and their effective range, resolution are as follows:
TYPE VARIABLE EFFECTIVE RANGE RESOLUTION
SNVT_amp_f Current 0.000 – 20 000.000 A 0.001 A
SNVT_vol_f Voltage 0.00 – 400 000.00 V 0.01 V
SNVT_power_f Power -2 000 000 000 – +2 000 000 000 (W or var) 1 (W or var)
SNVT_freq_f AC frequency 0.00 or 45.00 – 65.00 Hz 0.01 Hz
SNVT_pwr_fact_f Power factor -1.0000 to +1.0000 cos ϕ 0.0001 cos ϕ
SNVT_elec_kwh_l Energy 0.0 – 99 999 999.9 (kWh or kvarh)
Version 3.22 or earlier: Reset to 0 when exceeding the
max. value, count is continued. Counter pulse output is
stopped.
Version 3.23 or later: Reset to 0 when exceeding the
max. value, count is continued. Counter pulse output is
continued. 0.1 (kWh or kvarh)
SNVT_lev_percent Harmonic distortion 0.0 – 163.8 % 0.1 (%)
■
SERVICE PIN & RESET
Refer to “SHORTCUT MENU” in “OPERATION FLOWCHART” section of this manual for Service Pin and Reset operations.
Service Pin operation is possible also by pressing/holding
PF THD
button.
■
WINK
When WINK command is received, the front display backlight blinks for 5 seconds.