M-neb Dose+, Инструкция по эксплуатации

Страница: 20 / 40

- 20 -
6.5 Changing the operating modes
The basic setting of the M-neb
®
dose
+
mesh nebulizer MN-300/8 is the triggered mode. If
you have switched on the M-neb
®
dose
+
mesh nebulizer MN-300/8 and the operational
readiness is established, the M-neb
®
dose
+
mesh nebulizer MN-300/8 is in triggered mode.
The change of the operating modes is described below if the operational readiness of the
M-neb
®
dose
+
mesh nebulizer MN-300/8 is not established and the device is in the
switched off state.
6.5.1 Press (> 1 second) the on/off button of the M-neb
®
dose
+
mesh nebulizer MN-300/8
(control unit). The M-neb
®
dose
+
mesh nebulizer MN-300/8 switches on
automatically. As indication, you will hear a short acoustic signal tone and the battery
status indicator continuously lights up green.
6.5.2 The operational readiness of the M-neb
®
dose
+
mesh nebulizer MN-300/8 is
established after the operating mode status indicator has flashed three times blue
briefly.