M-Audio STUDIOPHILE DSM3, Руководство пользователя

Страница: 18 / 30

M-Audio Studiophile DSM3 Guide 12
The Digital Thru S/PDIF port on this speaker is
then connected to the Digital In port on the
other speaker to supply it with its digital audio
input.
Digital Channel Assignment
When using digital input, you must configure
the Channel Assign switches on the back of each
speaker to set whether that speaker plays the
Left or Right signal channel, accordingly.
To connect a digital source:
1
Do any of the following:
• Connect an AES cable (XLR) to the
AES/EBU In port on the back of a speaker.
• Connect a S/PDIF digital cable to the
S/PDIF In port on the back of a speaker.
2
Connect the other end of the cable to the dig-
ital audio source (for example, a digital output
from an M-Audio interface).
3
Connect one end of a S/PDIF digital cable to
the S/PDIF Thru port of the first speaker.
4
Connect the other end of the S/PDIF digital
cable to the S/PDIF In port of the second
speaker.
5
Set the back panel Channel Assign switch to
L (Left) or R (Right) as appropriate for the loca-
tion of each speaker.
In and Thru connections for digital input
(AES source shown)
Digital Input
(AES shown)
S/PDIF Thru
S/PDIF Input
Channel Assign switch
Channel Assign
switch