background image

M-Audio Studiophile DSM2 Guide

2

Inputs

M-Audio DSM2 speakers allow analog or digital 
inputs. Input type is selectable with the Input 
Select switch on the back panel of the speaker. 
Each input type has two available connectors. 

Analog Inputs 

The analog input signal is sam-

pled on input and processed digitally until it 
reaches the power amplifier stage. 

Available analog inputs include balanced XLR 
and 1/4-inch TRS connectors. These analog in-
puts are summed so that both input connectors 
may be used at the same time.

Digital Inputs 

The digital inputs automatically 

detect the sample rate and bit depth of the in-
put, and accept up to 192kHz/24-bit signals. 

Available digital inputs include AES/EBU and 
S/PDIF connectors. Only one digital connector 
may be used at a time.

Enclosure

DSM2 speakers feature a high-efficiency, rein-
forced medium-density fiberboard enclosure. 

Custom Waveguides 

The front panel waveguides 

are designed to maintain accurate frequency re-
sponse and stereo imaging. 

Bass Reflex Port 

A dual-flange bass reflex port 

provides enhanced low frequency response and 
clarity, while minimizing extraneous noise and 
vibration. 

Drivers

LF Driver 

DSM2 speakers have an 8-inch LF 

driver with a steel frame and single-piece anod-
ized aluminum diaphragm. 

HF Driver 

DSM2 speakers have a 1-inch HF driver 

with a soft-dome ferro-fluid cooled design that 
ensures smooth, accurate reproduction of high-
frequency details.

Digital Signal Processing

DSM2 speakers employ 36-bit digital signal pro-
cessing for control of crossover, EQ, and chan-
nel assignment settings. 

Crossover 

The crossover function is handled by 

a digital processor that ensures flat, distortion-
free integration of the LF and HF drivers. 

EQ and Placement Settings 

Six filters allow for 

customization of speaker response to a variety of 
sonic conditions and speaker orientations in 
your studio.

Digital Channel Assignment 

When working with 

digital input, this switch is used to select the 
channel to be monitored in the speaker. 

Volume Trim 

The Volume Trim control adjusts 

level of the input signal in the digital domain. 

Содержание Studiophile DSM2































Отзывы: