3. PRODUCT LABEL: This label contains the model and serial number information.
4. VENT PORT: This port aids in reproduction of very low frequencies by
discharging frequencies below 30 Hz..
5. VOLUME CONTROL: Use the volume control to set the output sound
pressure from the SP-8B to proper levels as required.
6. POWER SWITCH: This switch turns the monitor on and off. The on position
is indicated by the marking “I”.
7. POWER RECEPTACLE: Accepts a detachable 3-circuit line cord in order to
power the monitor.
8. FUSE HOLDER: Holds the external main fuse.
9. VOLTAGE-SELECT SWITCH: Provides 2 selections - 115VAC and 230VAC,
and should be set to match the “house current” (receptacle) voltage of the
country/location in which the speaker is used. The 115V setting is correct for
the USA andthe 230V setting correct for most of the UK and Europe.
Front Panel and Side View:
1. The front panel houses the Power LED which indicates whether the speakers
(amplifier) power is on or off.
HF Driver
(Tweeter)
LF Driver
(Woofer)
Power
LED
9.5 inches
11.82 inches
14.97 inches
5
Содержание SP-8B Studiophile Series
Страница 11: ...Appendix B Block Diagram 11 ...