User Guide
7
ProFire 610
Rear Panel Descriptions
10
Power Input (
) -
Connect the 12VDC 2A power supply here when using ProFire 610 with a four-pin FireWire
connection, or if your computer does not provide sufficient bus power on a 6-pin connection If your computer can
provide power over a 6-pin connection, it is not necessary to use the included power supply
Use only the power supply provided with the interface or a power supply with equivalent specifications.
11
FireWire Connectors ( ) -
Connect your computer to ProFire 610 using one of these FireWire ports and the
included FireWire cable The second FireWire port allows additional equipment, such as an external hard drive, to be
connected in a daisy-chain to the computer Do not connect the second FireWire port to another computer
ProFire 610 does not offer any kind of FireWire networking capabilities and attaching the interface to two computers
may result in damage to the interface and/or the computers
!
IMPORTANT
: Do not connect or disconnect bus-powered M-Audio, or 3rd party FireWire devices
while your computer is running (i.e. no “hot-plugging”). Make all FireWire cable connections while the
computer is powered off.
Reports have come to our attention of isolated problems when hot-plugging IEEE 1394
(aka “FireWire”) devices, including, but not limited to devices of the M-Audio FireWire family.
Hot-plugging refers to making connections to1394/FireWire ports while one or more of the
devices (including the computer) are still powered on. There have been rare occurrences when,
after hot-plugging, either the FireWire peripheral or the host computer’s FireWire port are rendered
permanently inoperable.
Please consult the Knowledge Base in the Support section at www.m-audio.com for updates on this
important issue.
12
MIDI In and MIDI Out Connectors -
MIDI input and output on standard 5-pin DIN connectors Connect a MIDI
controller keyboard, sound module or other MIDI device to these ports
13
S/PDIF Coaxial In and Out Connectors -
S/PDIF digital input and output on coaxial RCA connectors Sample
rates of up to 192kHz are supported
14
Line Outputs -
These 1/4” TRS jacks provide eight channels of discrete balanced or unbalanced analog output
15
Line Inputs -
These two 1/4” TRS jacks provide two channels of balanced or unbalanced analog input These will
appear as the second pair of inputs (e g inputs 3/4) in your audio application
Содержание Profire 610
Страница 1: ...ProFire 610 User Guide English ...