M-Audio M-Game Solo, Руководство пользователя

Страница: 19 / 34

19
Sample Editor
1. Sample Transport : The sample editor
includes standard play and stop
controls. The Play button will play the
sample from the start flag to the end
flag. Adjust the flags to adjust the play
start and end area.
2. Sample Visualizer : A visual
representation of the sample file's
audio.
3. Selection area : A selection area in
between the start and stop flag
allowing for zoom in/out controls.
4. Zoom : These + and - magnifying glass
icons zoom in or out with focus (not
between the beginning and ending
flag), zooming to the middle of a
selection, unless modifying zoom
clicks by pressing the shift key.
•
Shift + clicking zoom in : This zooms in to the current selection (between the beginning and ending flag).
•
Shift + clicking zoom out : This zooms out to the current selection (between the beginning and ending flag).
•
CTRL + clicking zoom in and out : This returns the sample waveform editor to the current selection (between the
beginning and ending flag).
5. Normalize Button : This adjusts the level of the sample's gain to its maximum non-clipping level.
6. Fader : This adjusts the level of the sample's gain. A red clip text will illuminate next to the gain fader when too much
gain has been applied to a sample. If this occurs, lower the gain fader.
7. Sample Frame : This image picker allows you to select an associated image. You can load .png, .jpg, .jpeg, .gif, .tif, .tiff
images with a size of 86x86 (standard res) or 172/172 (high-res displays). Images not formatted to the listed sizes will be
resized to fit in the frame.
8. Sample Title Bar : This naming field enables you to edit the name of the current sample.
9. Audition Privately : This button will remove the sample from every output except the headphones for mid-stream
editing purposes. When the app is in audition in phones mode, the AUD indicator at the top of the app will be
lit. Navigating away from the page will turn off audition mode.
1
2
3
4
7
8
5
6
9