M-Audio GSR10, Руководство пользователя

Страница: 7 / 24

Chapter 2: Setups 3
Chapter 2: Setups
This chapter shows how to set up and power your GSR
speakers, and provides audio connection diagrams of a few
typical setups.
Speaker Positioning
GSR10 and GSR12
GSR speakers can be positioned standing upright, as a floor
wedge monitor, flown, or mounted on a standard speaker
stand (not included).
Standing
When positioned on the floor standing up straight, the speak-
ers can be stacked (never stack more than two GSR speakers).
When stacking a speaker, make sure its feet align properly on
the top of the lower speaker using the interlock feature on the
tops of the GSR10 and GSR12 cabinets.
Floor Wedge
The GSR10 and GSR12 also have 45° angled sides that let you
lean it back on itself, like a typical “floor wedge” monitor.
Flown
For suspension mounting or “flying” your GSR10 and GSR12,
there are five (5) M10 flypoints located on the top, bottom,
and back of the cabinet. Simply thread in a corresponding
M10 eye-bolt, and you’re ready for “flying” your GSR
full-range cabinets.
To access the M10 flypoints:
„
On the top, bottom, and rear of the cabinet, remove the
threaded caps that cover the M10 inserts.
Mounted
Each GSR10 and GSR12 features a 36mm pole mount recepta-
cle on the bottom, enabling you to mount the speaker on any
standard 1 3/8-inch speaker stand. After mounting a speaker
on any pole or stand, be sure to hand-tighten the rear stabiliz-
ing screw on the back of the cabinet. This ensures the cabinet
does not move or turn during performance.
The GSR18 subwoofer has a 1 3/8-inch pole mount on its top,
letting you use a standard speaker pole to mount a GSR10 or
GSR12 directly on top of a GSR18.
GSR12 standing straight (left) and stacked (right)
GSR10 leaned back to use as a floor wedge monitor
Top view of GSR10 (or GSR12) showing M10 flypoint inserts
GSR10 mounted on a pole stand
1 1