72
Messages
By default, the pads are set to send MIDI notes on Channel 10, which is commonly reserved
for drums and percussion in the General MIDI (GM) specification. You can change this setting
if you want, though.
MIDI Notes
You can assign the pads to send MIDI note numbers.
To assign a MIDI note to a pad:
1.
Press
Edit
to enter Edit Mode. The
Edit
button will light up.
2.
Press the desired pad. The pad’s number will appear in the
display
.
3.
Press the
Ctrl Assign
key. The
display
will show
ASGN
for 1 second and then show the
pad’s number (
P__
) and a number for the type of message it sends.
4.
Use the numeric keys (
0
–
9
) to enter
147
(if the display does not already show it). This sets
the pad to send MIDI note messages.
5.
Press the
Data 1
key. The
display
will show
DATA1
for 1 second and then show the pad’s
number (
P__
) and a number for the MIDI note.
6.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter the desired note
number (
001
–
127
).
7.
Press the
Enter
key. The pad is now set to send the assigned MIDI note, and you will exit
Edit Mode.
To cancel your changes instead, press
Edit
. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
Tip:
You can assign a button to send a Note On message when it is pressed one and send a
Note Off message when it is pressed a second time. To do this, follow the steps above, but
enter
148
(instead of
147
) in Step 4.
Pad Drum
MIDI
Note
Pad Drum
MIDI
Note
P1
Kick Drum
36 (C2)
P9
Pedal Hi-Hat
44 (Ab2)
P2
Side-Stick
37 (Db2)
P10
Low Tom
45 (A2)
P3
Snare Drum
38 (D2)
P11
Open Hi-Hat
46 (Bb2)
P4
Hand-Clap
39 (Eb2)
P12
Low Mid Tom
47 (B2)
P5
Electric Snare Drum 40 (E2)
P13
Hi Mid Tom
48 (C3)
P6
Low Floor Tom
41 (F2)
P14
Crash Cymbal 1
49 (Db3)
P7
Hi-Hat (closed)
42 (Gb2)
P15
High Tom
50 (D3)
P8
High Floor Tom
43 (G2)
P16
Ride Cymbal 1
51 (Eb3)
Содержание code25
Страница 1: ...User Guide English Manual Version 1 0...
Страница 115: ...m audio com Manual Version 1 0...
