32
Zone Octave and Transposition
You can set each zone to a different octave or transposition. The keys of each zone can then
send different notes to a different virtual instrument or synthesizer (set to receive MIDI
messages on those channels).
The zone octave and transposition are independent from the keyboard’s overall octave and
transposition; all of these affect the note a key sends out. For example, if a zone’s octave shift
is set to +1, and the entire keyboard’s octave shift is set to +1, the notes played by the zone’s
keys will be 2 octaves higher than normal. Similarly, if a zone’s octave shift is set to +1, and
the entire keyboard’s transposition is set to -2 (semitones), the notes played by the zone’s
keys will be 10 semitones higher than normal.
To set the zone octave and
/
or transposition for the keys:
1.
Press and hold
Zone
for 1 second to enter Zone Edit Mode. The active
Zone Buttons 1
–
4
will flash.
2.
Press one of
Zone Buttons 1
–
4
to edit that zone. Alternatively, you can press multiple
Zone Buttons 1
–
4
to edit those zones simultaneously. The
display
will show the zone’s
current lowest and highest keys (e.g.,
C 1.C 5
or
Bb2.Eb4
).
3.
To change the octave,
use the
Key Octave –
/
+
buttons to lower or raise the octave (
-5
to
5
). The
display
will show
OCT
and the number of octaves.
To change the transposition,
press and hold
Transpose
, and then use the
Key Octave –
/
+
buttons to lower or raise the transposition. The
display
will show
TRN
and the number
of semitones (
-12
to
12
).
To change the octave and/or transposition for another zone, repeat Steps 2–3.
4.
Press
Zone
to exit Zone Edit Mode.
Содержание code25
Страница 1: ...User Guide English Manual Version 1 0...
Страница 115: ...m audio com Manual Version 1 0...
