M-Audio BX8 Carbon, Руководство по обслуживанию

Страница: 5 / 8

NO.
Corrective Action
Tweeter defect
2 Woofer defect
1
Replacing woofer:
1. Disassemble the faceplate as in the photos
2. Remove the screws and remove the
woofers.
3. Put new woofer in.
4. Reattach the screws and faceplate.
LED defect
Replacing LEDs:
1. Disassemble the faceplate as Photo 1/2.
2. Remove the screws and remove the woofer
3. Cut the cable tie, and disconnect the
tweeter cable as in Photo 5.
4. Remove the screws on the amp as in Photo
6.
5. Remove the defect LED cable as in Photo
7/8.
6. Replace the LED cable and glue it, then fix
it to the amp.
7. Connect the tweeter cables and cable tie,
and reassemble the woofer.
8. Connect the tweeter cable and reattach the
faceplate.
4
BX5/6/8 Carbon Black Service Procedures 06/27/2014
Photos
Replacing tweeter:
1. Disassemble the faceplate and the tweeter
cable. Refer to photos.
2. Remove the screw to remove the tweeter.
3. Put new tweeter on and fix on the faceplate.
4. Connect the tweeter cable and reattached
the faceplate.
Replacing amplifier:
1. Disassemble the faceplate as in Photo 1/2
2. Remove the screws and remove the woofer
3. Cut the cable tie,and disconnect the tweeter
cable as in Photo 5.
4. Remove the screws on the amp as in Photo
6.
5 .Remove the defect amp.
6. Connect the LED cable and glue it, then
assemble the amp.
7. Connect the tweeter cable/cable
tie/assemble the woofer/connect the tweeter
cable and fix the faceplate.
Amp defect 3
Issue
Photo4:Remove the screws,get out
the defect woofer and replace new
woofer;
Photo3:Get out the screws
and get out the defect
tweeter to replace new
tweeter;
Photo5:cut the cable tie,and
disconnect the tweeter cable
in white
Photo7:put some speaker
clean liquid on it to soften
the yellow glue,then pull
out the lED cable.
Photo8:use glue gun to melt the
hot melt glue on it;
Photo2:To remove the faceplate
from upside to downside by
removing the pillars on it,and then
pull out the tweeter cable;
Photo1: Put blade or
screwdriver into the gap
between the faceplate and
the cabinet to remove the
faceplate;
Photo6:disassemble the
screws on the backside;