M/A-Com P5100 Series, Руководство пользователя

Страница: 13 / 16

MM101880V1 R1A
13
APPENDIX B – MESSAGES
During radio operation, various radio status messages can be displayed. The messages are described
below.
MESSAGE NAME DESCRIPTION
QUEUED Call Queued Trunked mode only. Indicates the system has placed the call in a
request queue.
SYS BUSY System Busy Trunked mode only. Indicates the system is busy, no channels are
currently available, the queue is full, or an individual call is being
attempted to a radio that is currently transmitting.
DENIED
Call Denied Trunked mode only. Indicates the radio or talkgroup is not
authorized to operate on the selected system and/or talkgroup.
CC SCAN Control Channel Scan Trunked mode only. Indicates the control channel is lost and the
radio has entered the Control Channel Scan mode to search for
the control channel. (Usually out-of-range indication.)
WA SCAN Wide Area Scan Trunked mode only. Indicates the radio has entered the Wide
Area Scan mode to search for a new system (if enabled during
initialization).
TALKARND
Talkaround Conventional mode only. Indicates the radio is operating on
conventional channels in talkaround mode (no repeater).
SYSC ON System Scan
Feature On Trunked mode only. Indicates the System Scan features are
enabled.
SYSC OFF System Scan
Feature Off Trunked mode only. Indicates the System Scan features are
disabled.
LOW BATT
Low Battery Battery voltage has dropped to the point that the radio is no
longer able to transmit. If the user attempts to transmit, the Low
Battery message appears while the PTT is depressed. The radio
emits a periodic booping sound.
RXEMER Receive
Emergency Trunked mode only. Indicates an emergency call is being
received. This message will be flashing on line two.
TXEMER
Transmit
Emergency Trunked mode only. Indicates an emergency call has been
transmitted on this radio. This message will be flashing on line
two.
VOL=31 Volume Level Indicates the current volume level. The volume level display
ranges from OFF (silent) to 31 (loudest).
WHC Who Has Called
(trunked mode only) ON – indicates an individual call has been received, but not
responded to. The indicator turns OFF if the individual call mode
is entered, the system is changed, or the radio is turned off and
back on.
UNKNOWN Unknown ID Trunked mode only. Indicates an individual call is being received
by an unknown radio ID.