EKO – a response to 5 questions.
NORMAL – a response to 10 questions.
HIGH – a response to 20 questions.
ENTER:
a transfer of the flashing cursor to the exact place of the adjusted value.
Hold the button to transfer the cursor to the starting position and to save the settings
in the memory.
DOWN:
choose to lower the variation (HIGH to NORMAL, NORMAL to EKO).
UP:
choose to raise the variation (from EKO to NORMAL, NORMAL to HIGH).
SELECT:
a transition to the manufacturer's codes screen. Hold the button to return to
the previous information screen. The button is inactive, when the cursor is not set at
the starting position with the
ENTER
button.
Manufacturer's codes.
The flashing letter means the starting position of the cursor in the settings
mode.
•
In the first line: letter C, ENTER CODE
•
In the second line: the code in the form XXXX
The manufacturer's codes are needed to perform controller's special functions, e.g.,
memory format and the return to default settings.
ENTER:
a transfer of the flashing cursor to the exact place of the adjusted value.
Hold the button to transfer the cursor to the starting position and to save the settings
in the memory.
DOWN:
decrease the adjusted value.
UP:
increase the adjusted value.
SELECT:
a transition to the previous information screen. Hold the button to return
last chosen information screen. The button is inactive, when the cursor is not set at
the starting position with
ENTER
button.
4.
Starting sequence.
After activating the power and entering the code, the controller check the status
of the devices that are in the system. If any inconsistencies appear, the display might
show:
•
BUTTON ERROR –
if any button is pressed. It is a serious error and the
scale's action is paused/suspended. The controller is supposed to be turned off
and then the button's malfunction has to be checked.
•
MEMORY ERROR –
it means that the local memory is damaged. It is a
serious error and the scale's action is paused/suspended.
•
WARNING: Time is not set –
it means that the local clock is not set. It may
also suggest that the battery sustaining the local clock is depleted and must be
replaced with a new one. After replacing the battery, the time is to be set in the
