yellobrik
®
Quick
Reference
yellobrik
®
LYNX
Technik
AG
|
www.lynx-technik.com
Technical Specifications
SDI Video
1 x SDI video input on 75 Ohm BNC connector
1 x SDI video output on 75 Ohm BNC connector
SMPTE ST 2082, SMPTE 424M, SMPTE 292M
Electrical Return
Loss:
1.5 – 3GHz
>10dB
6 – 12GHz
>4dB
Automatic cable EQ
1.5Gbit/s
3Gbit/s
12Gbit/s
220m*
140m*
80m*
Belden 1694A
Belden 4794R
Fiber Optic
1 x fiber optic input (LC/PC or ST/PC Connections)
1 x fiber optic output (LC/PC or ST/PC Connections)
SMPTE ST297-1:2015 , ST297-2:2017
AES
AES3-id on 75 Ohm BNC, 2 channels
USB
Standard USB Mini B port for yelloGUI/LynxCentraal int
firmware updates
Power
+12V DC @ 13W nominal - (power supply included)
(supports 7 - 24V DC input range)
IDC 1411
AI based instant dialogue cleaner, filter and amplifier
U
SB
PC
C
on
tr
ol
®
Power +
Power LED
Reset
Prog.Settings
0V
12V
⎓
+
–
Instant
12G SDI
Dialogue Cleaner
IDC 1411
SDI
AES
SDI
AES
In
In
Out
Out
SDI
developed in cooperation with
Power LED Status
Power ok and no
programmed settings
Power ok and internally
programmed settings
present
Yellow
Green
R
AES Out
USB
SDI Out
Reset
SDI In
AES In
SDI Fiber I/O
Connections
Labels on the module show the position and type of
expected connections. SDI input can connect via BNC
connectors or a choice of the following SFPs:
Transceiver (send and receive)
Option #
Wavelength
TX Power
RX Sensitivity
Max Distance*
OH-TR-12G-LC
1310nm (sm)
-5dBm
-10dBm
10km (6.2miles)
OH-TR-12G-XXXX-LC
1270-1590nm (sm)
-2dBm
-10dBm
10km (6.2miles)
Transmitter
Option #
Wavelength
TX Power
Max Distance*
OH-TX-12G LC / ST
1310nm (sm)
-5dBm
10km (6.2miles)
OH-TX-12G-XXXX-LC / ST 1270-1610nm (sm)
-2dBm
10km (6.2miles)
Receiver
Option #
Wavelength
RX Sensitivity
OH-RX-12G LC / ST
1260-1620nm (sm)
-10dBm
Operation
The IDC 1411 module supports automated plug-and-play functionality. In
case the default parameters are not suitable for your intended purpose it
is possible to change them via the yellow interface of our control software
LynxCentraal or yelloGUI.
A USB Connection to the module is necessary for this.
Settings
With a USB connection to a LynxCentraal or yelloGUI workstation established
you get access to the device settings.
The IDC1411 processes one stereo audio channel which can be freely config-
ured to be sourced either from one of the SDI Inputs embedded stereo chan-
nels or from AES Input.
The AES Output will always contain the processed stereo audio channel.
Additionally one of the SDI Outputs embedded audio channels can be over-
written by the processed stereo audio channel.
Audio processing is split into three function blocks:
• Audionamix® IDC
• Equalizer
• Compressor
Laser Radiation
Do not look directly into emitter
with optical instruments
WARNING
CLASS 1M LASER PRODUCT
*Distances are an approximation. Real distances may vary.
*Distances are an approximation. Real distances may vary.
Processing Delay
The timing of the SDI and AES Output will be locked to the SDI Input. Additional
delay introduced by the audio processing will be compensated depending on
the video refresh-rate resulting in the following input to output delay:
Video Standard
720p
1080i
1080psF
1080p
2160p
Refresh Rate
30, 29,
25, 24,
23
50 59, 60 50, 59,
60
25, 29,
30
23, 24,
25, 30
50 59,
60
50 59,
60
Delay (frames)
2
3
4
2
2
2
3
4
3
4
