LYNXTechnik C MX 5710, Справочное руководство

Страница: 15 / 36

C MX 5710 Reference Manual. Rev 1.0
Page 15 of 36
Alarm/LED Status Indicators
LED: Video Status
LED Color Indication
Green

Video input ok
Yellow

Frame Rate Mismatch
(Mismatch between the video frame rate and the connected reference).
Red

Video input missing
LED: Audio Status
LED Color Indication
Green

All used audio inputs present and o.k.
Yellow

Warning condition. Any of:
- At least one embeeded group is missing one AES signal.
- At least one external Audio Input is missing but routed to be embedded.
Red

Error condition. Any of:
- At least one external Audio Input has no signal.
- At least one embedded group is missing both AES signals and Embedder event
is enabled.
LED: Local / Remote
LED Color Indication
Green

Local control via DIP switches active, all settings according to local DIP switches
Off

Current settings may be overwritten through remote control
Alarm LED
The Alarm LED is
visible through the RackFrame’s front cover.
LED Color Indication
Green

Normal Operation .
Yellow

Problem with the video inputs and/or reference missing.
Yellow flashing
  “Locate Device” activated from Control System
triple yellow flash
    
Saving current configuration to local flash-RAM
Red

No video input detected
Power LEDs
Power 1 Indication
Green

Power from Main PSU ok
Off

No power from Main Power Supply
Power 2 Indication
Green

Power from Redundant PSU ok
Off

No power from Redundant PSU
NOTE: If one of the Power LEDs should be OFF while the corresponding PSU is
working correctly, then please contact technical support for a verification of the
board’s power input fuse.