Page 1 of 4
10” TSD
Installation Guide
LYNX-WD-010-01 10” Display Assembly
Lynxspring, Inc.
2900 NE Independence Ave
Lee's Summit, MO 64064
(816) 347-3500
[email protected]
www.lynxspring.com
Страница 1: ...Page 1 of 4 10 TSD Installation Guide LYNX WD 010 01 10 Display Assembly Lynxspring Inc 2900 NE Independence Ave Lee s Summit MO 64064 816 347 3500 sales lynxspring com www lynxspring com ...
Страница 2: ... will be required for the Switching Adaptor Input at 100 240V at 50 60Hz The supplied USB cable to DC Jack is 1M long ensure the cable will reach the power supply An Ethernet cable will be required if a wired network connection is used Mounting Options On the rear Bezel mounting hole alignments can be found for a standard VESA mount and electrical pattress box fixings NOTE Hardware fixings to the ...
Страница 3: ... 1 5mm To be used as a restart tool 1 Secure the rear bezel metalwork to the wall or panel in the chosen location ensuring an opening matching the cut out area on the bezel is available for cable access Fixing Points 2 Make the wiring connections to the tablet display DC jack plug for power and OTG cable for connection to the ethernet adapter if a wired connection is required 3 Place the tablet in...
Страница 4: ...e the lugs and fasten in place with the tamperproof screws Fasten Tamper Screw x 2 Tamper Screw Detail PLEASE NOTE A T25 Tamper Proof Driver will be required to secure the bezel cover together Drilling Template Download the Drilling Template here Engage Lugs Slide Cover On ...