PEC 1864 Reference Manual - Rev 1.2
© 2017
LYNX
Technik
AG
Page 19 of 41
Initial Setting of IP Address
The PEC 1864 is delivered with a fixed IP address (192.168.1.161).
To use the PEC 1864 in your network you need to change the IP address to fit your local
requirements. To get direct access from your computer to the PEC 1864, i.e. a cable in
between the PEC 1864 and your computer, you need to set the IP settings of your computer
accordingly. After you have modified the IP settings of the PEC 1864 you can set back your
computer to the original IP settings.
Windows 7 or Windows 8.x or Windows 10
To change the computer’s IP address in Windows, type
network and sharing
into the Search
box in the Start Menu and select Network and Sharing Center when it comes up. If you are
in Windows 8.x it will be on the Start Screen itself, like the screenshot at the top of this article.
If you’re in Windows 7 or 10 it’ll be in the start menu.
When the Network and Sharing Center opens, click on
Change adapter settings
. This will
be the same on Windows 7 or 8.x or 10.
