R FR 5041 Reference Manual. Rev 1.3
Page 27 of 34
Module Properties
Selecting
Properties
will give additional information about the module. This is
information which is also important in case of service issues
The
Locate function
is described below
New Control Window
New Control Window
opens another window for control of the selected module.
With this function several control windows can be opened simultaneously showing
various control tabs.
Renaming Devices
Rename
allows to change any module
name with a user defined description
Release
will force the module to store all
current settings to be written into the on-
board Flash memory
Note:
After changing any parameter the
module will write the changes to the
Flash memory automatically after 10
seconds
To avoid any unwanted changes of settings all controls of the selected card can
be
Lock
ed. All control elements of this module are then grayed out.
If at any time it is necessary to return the module o the factory default settings this
can be done using the “
Restore Factory Default
” function. You will be prompted
if you are sure, as this will erase any stored information from the module flash ram
and set it back to the factory settings.
