R FR 5041 Reference Manual. Rev 1.3
Page 24 of 34
Reporting Problems
If you are experiencing problems with your installation please contact us for assistance.
We will require a copy of a log file that is maintained by the system that can be found in
the
C:\Program files\Lynx\C3_local directory
. The file is called
c3_local.logfile.txt
.
We will ask you to E-Mail this file with a brief description of the problem and also any
steps we can use to duplicate the fault. Send messages to:
Support @ lynx-technik.com
Software Operation
The LYNX Control Software is intuitive and simple to use, presented in a familiar
Windows style layout. It is beyond the scope of this manual to provide detail on each
individual control available for all supported modules, please refer to the manuals of the
individual modules. This is intended as an introduction to the general layout and the use
of the control GUI.
Control System Layout
The above screenshot shows the normal layout of the control system GUI. The
descriptions below provide more detail on each section of the GUI and its operation.
1
2
3
4
