greenMachine
®
titan Reference Manual - Rev 2.0
© 2019
LYNX
Technik
AG
Page 34 of 57
Universe Page
The greenMachine can be used as a stand-alone module or it can be fully controlled by
the greenGUI Windows and Mac desktop application. When part of a Universe, each
greenMachine can also be configured locally.
The greenUniverse encompasses everything. It graphically depicts all greenMachines in
the designated control network. The universe is a zoomable and pannable view.
Each greenMachine in the universe contains a flexGUI to control all the processing
parameters within the constellations.
The universe has access to all machines and all their parameters. Selecting a
greenMachine in the Rolodex (scrolling menu) will cause the universe to zoom into that
machine. Double clicking on a machine in the universe graphic will bring focus in the
Rolodex.
Constellation Subpage
On the right hand side of the Constellation Editor you will find a Rolodex with all the
Constellations available in the greenUniverse (see picture below). These are the
templates that you can use to reconfigure your machine. The constellation rolodex does
not display or contain any machine specific information. To deploy a Constellation onto
any greenMachine, just select it from the Constellations Rolodex, and drag and drop it
on to the greenMachine.
The greenMachine will then have a thick blinking colored border and the Deploy button
on the top right of the Universe canvas will also be colored (see image below). If the
required license has been purchased, the border and the Deploy button will be green
and the Deploy button can be clicked to finalize the license installation. If a constellation
licensed is not available in the greenUniverse, the border and the Deploy button will be
