greenMachine
®
titan Reference Manual - Rev 2.0
© 2019
LYNX
Technik
AG
Page 32 of 57
Nova Subpage
The full-functional greenGUI is just perfect for the maintenance engineers or expert
operator personnel, i.e. for all situations where direct and unlimited access to all
functions is desirable. But there are other applications and use-cases, where the
opposite is required. As a simple example, a particular application might require a simple
control panel, where only the audio gain levels of a few selected channels can be
adjusted
– but nothing else. These few controls should be accessible directly (no need to
open sub-pages or select tabs). And no other controls should be visible, because those
other possibilities could potentially confuse the operator or (even worse) lead them to
make inappropriate modifications to parts of the system that should not be touched.
This demand for freely definable Control Panels (i.e. which are not pre-defined by LYNX)
is satisfied by the LYNX CustomControl feature. CustomControl provides a powerful,
interactive and intuitive way for setup and deployment of one or more CustomControl
Designs. Any number of custom-made Designs (dedicated GUI pages) can be prepared
for all those different applications and operating situations in a system where only a
subset of the full power of the LYNX greenGUI shall be exposed. Individual such designs
can then be loaded and displayed from various workstations and mobile tablet
computers.
Under the link below you can find a document describing in detail, how you can make the
best use of the various capabilities of CustomControl.
technik.com/fileadmin/user_upload/LYNX_APPolo_UserGuide_CustomControl_V3.0.pdf
