greenMachine
®
titan Reference Manual - Rev 2.0
© 2019
LYNX
Technik
AG
Page 17 of 57
Processing Configuration
The three buttons to the left of the display access the three processing configuration
menus in the panel.
Together with the rotary push encoder and the back button, these three configuration
menus are all that is required to configure the processing of the greenMachine titan.
Processing Configuration Menus
The processing configuration parameters are generally grouped to the
Video Proc
and the
Audio Bus
menus according to their respective processing function. Settings that cannot
be logically associated to any of these categories can be found in the
Misc
menu.
Inside the three processing configuration menus, the parameters are ordered according
to the processing category they belong to. These processing categories are the same as
described in the Constellation chapter:
Audio I/O
,
Sync
,
Video Convert
,
Image Proc
,
Generate, Monitoring
and
Global
, and are shown with the same color code. The picture
below shows the first level of the VideoProc1 menu with all processing categories. The
parameters controlling the Routers are grouped under the category
I/O Config
.
First Level of the VideoProc1 Menu - the Processing categories
Configuration Controls
