Lynx C DX 5024 C, Справочное руководство

Страница: 14 / 31

Reference Manual C DX 5024 C Version 2.0
Page 14
Link Settings
Balanced / Unbalanced Audio
It is possible to set the analog audio outputs to
balanced or unbalanced with automatic gain
adjustment.
This is done using physical links on the card and the
card will need to be removed from the card frame
for changes to be made*. Figure 2 shows the
locations.
Link open = Audio balanced
Link closed = Audio unbalanced
(with automatic gain adjustment)
If the respective link is closed the “-“ pin of the
audio output is set to ground.
*Note . It is not necessary to power down the frame
to remove the card. All Series 5000 Card Modules
can be hot plugged / unplugged.
Settings and Control
The C DX 5024 C has an integrated micro-
controller, which enables the module to be
configured and controlled locally using the
multifunction switch and 4 character dot matrix
display, or from remote when using one of the
optional controllers and control software.
Once set, all settings are automatically saved in
non-volatile internal memory. (Flash ram) The
module will always recall the settings used prior to
power down.