-1-
-2-
-3-
1. Overview
2. Package Checklist
Before installing the , verify that the package contains
the following items:
1 x Media Converter
Power adapter (Check for area type)
Quick Installation Guide
3. Hardware Installation Procedure
The Media Converter is used to connect devices with
10/100/1000Base-T cable to fiber-based Ethernet. The
Media Converter is enhanced with Link Fault Signaling.
STEP 1 : Remove from packaging and connect the 12VDC
adapter to the power input on rear panel.
STEP 2 : Connect the Ethernet (RJ45) port to the networking
device. See the LNK/ACT LED to confirm if the
connection is established.
STEP 3 : Insert the SFP ( Not necessary for MC-1000SC-MM /
MC-1000SC-SM )
STEP 4 : Connect the fiber cable to the fiber port.
STEP 5 : See DIP switches on rear panel to enable/disable
the required features per application.
Quick Installation Guide
MC-1500 / MC-1000SC-MM / MC-1000SC-SM
Converter with 1x9 SC, SFP and RJ-45 Connectors
Converter with power jack and DIP switch
Front Panel View
Fiber Port
Fiber Port
LED Indicators
LED Indicators
RSV
RSV
Copper Port
Copper Port
10/100/1000
LNK/ACT
LFS
1000
1000
10/100/1000
LNK/ACT
LFS
1000
1000
RSV 1000
LFS
LNK/ACT
10/100/1000
1000
RSV 1000
LFS
LNK/ACT
10/100/1000
ON
OFF
PWR
12V DC
4. DIP Switches
DIP 1 Enables LFS function
DIP 2 Reserved
5. Location
Wall-mounted DIN-Rail-mounted
Rear Panel View with DIP Switches
12V DC
PWR
6. About RJ-45 Cables
When connecting your network devices, use at least
standard Category 3 eight-way cables for 10Base-T
The Media Converter can be placed on a desktop or horizontal
surface, it can be wall-mounted, or DIN-Rail mounted.
