Lyngdorf TDAI-3400, Руководство пользователя

Страница: 32 / 47

32
Replace all voicings from file
This is the functionality to replace all voicings in the amplifier with a new set from a .voicings.xml file.
Remember that this will overwrite all voicings currently in the amplifier. Click
“Browse” to find the
.voicings.xml file you wish to upload and then click
“Apply” to use it.
On the bottom of the page is a link to download the current set of voicings in the amplifier to a .voicings.xml
file.
Through selecting any of the stored Voicings, you can see the details by selecting
“Edit”. You can also delete
the stored Voicings and add new designs here.
Creating Voicings
A Voicing can combine up to eight filter sections. For each section, you can choose between certain filter
designs, which then in combination will give you the total correction of the Voicing.
For each Voicing you will see a green line showing the total correction as well a blue line showing the
correction caused by the selected filter section. If there is only one active filter section, only the blue line is
shown. You can select between following filter designs:
•
Low Pass: Functions as a crossover filter reducing the signal above the frequency.
•
High Pass: Functions as a crossover filter reducing the signal below the frequency.
•
Low Shelf: Attenuates the lower frequencies to a specified level.
•
High Shelf: Attenuates the higher frequencies to a specified level.
•
Parametric: Attenuates specific frequency.
All these filters can be with positive or negative gain
– effectively reversing the effect of the filter.
You can adjust the Overall gain for each voicing in order to be able to switch between voicings without
experience any change in perceived level.
In this example (Action Movie Voicing) you will see the combined effect of two filter sections:
•
Negative High Shelf from 120 Hz
–
creating a boost in the bass region
•
Negative High Shelf from 8,000 Hz
reducing the highest frequencies
•
Overall gain set to +6 dB as
compensation for the reduction in
overall level experienced with the
two filters.
Try experimenting by creating your own
Voicings and test the functionality of the
different filter sections.